Member #331192

Member Since: June 13, 2012

Country: United States

  • THE DIODE ISSUE RESOLVED I have just been using the Roving Networks XBee planform WiFi device which does not have an internal pullup to 3v3. Do not short out the diode as this pushes 5v into it…bad times. Solder a 10k or similar resistor between DIN on the XBee side of the diode and the 3v3 rail. On the Explorer there are horizontal pads either side of the black plastic XBee header. The 3v3 DIN and the 3v3 rail are next to each other so this is easy to do.

No public wish lists :(