Member #334574

Member Since: June 28, 2012

Country: United States

  • Product DEV-00670 | about 2 years ago

    If anyone is looking for a good introductory writeup to read on the Roomba, there is a great one here: http://www.robotappstore.com/Knowledge-Base/1-Introduction-to-Roomba-Programming/15.html

    It also goes over connecting to the roomba’s SCI interface / setting baud rates, and other commands. Hope this helps!

  • Product DEV-08243 | about 2 years ago

    For information on programming the roomba using the SCI port, there is a good tutorial here: http://www.robotappstore.com/Knowledge-Base/3-Serial-Port-Baud-Rate-Configuration/17.html It goes over basic communication to the roomba via the SCI port - which this cable will allow you to do. Hope this helps!

  • Tutorial - Roomba Remote Tilt Controller | about 2 years ago

    If anyone is interested in reading a good writeup about programming the roomba using rootooth or a direct serial cable link this might be worth checking out:

    http://www.robotappstore.com/Knowledge-Base/3-Serial-Port-Baud-Rate-Configuration/17.html

No public wish lists :(