SparkFun will be closed Nov 26th and 27th for the Thanksgiving holiday. Orders placed after 2:00pm MT on the 25th will ship out Monday the 30th.

Member #336400

Member Since: July 7, 2012

Country: United States

  • Hi,

    Not really. If you power up the board, Vcc will show 3.3V which you can use to power other devices, as long as you keep the current consumption lower than around 150mA.

    If you just want to get a logical output from WonderBeeps, you should connect two wires: one for GND and the other for your selected output.

    Hope this helps,


No public wish lists :(