×
Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.
Member #337887
Member Since: July 13, 2012
Country: United States
-
my robot is about 100lbs and is okay. I used lock tight on the set screws and that helped. I don't know is I'd go much more than that.
-
I got a few set of these to mount a pinion gear to my project. Two of these where ok but on two of them the bearings were too tight and did not spin freely. I think these parts may work well to hing two channels together or something, but I ended up using an other piece of channel and two flanged bearing to hold the a spinning shaft.
-
6-32 Socket Head Machine Screw works well to connect the the 0.77" hubs.
-
Wow I like this stuff. I just received and and assembled me first order and it and it works well and feels very strong and ridged. I got most of the parts right but I missed adding the spacers, this gear is off an1/8" from the 16 tooth pinion gear and the spacer will make that up. Also it looks like it's a good idea to uses them between bearing and the gears or collar.
No public wish lists :(