Member #338073

Member Since: July 14, 2012

Country: United States

  • Product DEV-10999 | about 2 years ago

    Under Linux x64 Mint 11, when I upload on /dev/ttyACM10 the yellow/green led flashes several times the board resets but it appears on /dev/ttyACM11 and the IDE (1.0.1) sits there on Uploading… When I move the IDE to ttyACM11 and try again the board moves to ttyACM12 (it started on ttyACM0).

    On windows 32bit the board is on com13 but resets to com12 with a ! symbol, I have to shut the IDE down, delete com12 from hardware manager and remove/re-insert the board and it install the drivers again and comes back on com13.

    I cannot program this board, have no problems with original Leonardo

No public wish lists :(