×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #341790

Member Since: July 30, 2012

Country: United States

  • My relay is drawing 95mA @ 5V. I measured the coil resistance and it is 52Ohms instead of the 320Ohms (with 10% error) specified by the data sheet. This makes it unusable for my application. Did I just get a bad part or is the data sheet incorrect?

  • I would like to run 0.82amps at 13V through this board. Does anyone know how much current this board can handle?

  • Is this the S2 or S2B? If it is really the S2B, it should have a peak current of 205mA and a range of 2 miles. Also its transmission power should be 63mW. I may have to buy this part from another site if I can't be sure it is the S2B (as claimed by description)!

    -I found the S2B specs on the provided Datasheet.

No public wish lists :(