Member #346327

Member Since: August 13, 2012

Country: United States

  • Have used different Arduino before so am familiar with platform. I am getting the same: avrdude: stk500_getsync(): not in sync: resp=0x00, message and can’t figure out why. Under ports, I see a valid connection with USB Serial Port(COM3). I cannot download to the board, get above message. Board type is set to Arduino UNO. Speed is 9600. D13 LED is blinking. XBEE Serial set for SW. NO output at serial monitor window. Removed sensors. Same issue. It doesn’t act like it is communicating at all. What should the driver file name read on COM3? I have tried the 1.0.6 and the 1.5.8 versions of the Arduino IDE. It won't talk at all.

  • Have used different Arduino before so am familiar with platform. I am getting the same: avrdude: stk500_getsync(): not in sync: resp=0x00, message and can't figure out why. Under ports, I see a valid connection with USB Serial Port(COM3). I cannot download to the board, get above message. Board type is set to Arduino UNO. Speed is 9600. D13 LED is blinking. Tried XBEE Serial set for HW and SW. NO output at serial monitor window. Removed sensors. Same issue. It doesn't act like it is communicating at all. What should the driver file read on COM3? What should the XBEE be set for, don't know what this switch does.

No public wish lists :(