×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

effgee

Member Since: September 10, 2012

Country: Australia

  • Product BOB-10859 | about 2 years ago

    The project does compile without changes from my recollection once you get the directory names right

    Good to hear. Maybe all 4 ino files need to live in folders in the arduino library ?

  • Product BOB-10859 | about 2 years ago

    Would be great if some guru could create a basic demo project for arduino. I can’t get the example here to compile, it seems to be structured all wrong for the arduino IDE (4 separate INO files is like 4 separate projects to my understanding). I’ve copied source from 3 of the files into a single support.h file, but the IDE sitll complains

    “In file included from dSPIN_main.cpp:3: /dSpin_support.h: In function ‘long unsigned int dSPIN_Param(long unsigned int, byte)’: dSpin_support.h:325: error: ‘dSPIN_Xfer’ was not declared in this scope”

  • Product BOB-10859 | about 2 years ago

    you can use these 3.5mm screw terminals https://www.sparkfun.com/products/8084

    or if you prefer green, http://www.pololu.com/catalog/product/2446

No public wish lists :(