Member #367750

Member Since: October 8, 2012

Country: United States

  • Product WRL-10559 | about 2 years ago

    I just got this in the mail, and it seems that the pin labeled PIO10 on the breakout board actually leads to GPIO9 on the RN-41, and that PIO11 actually leads to GPIO8. I’m going off of the RN-41 datasheet version 3.4r 8/21/2012.

    Probably something you should look into.

    EDIT: I also just checked the eagle board layout file, which confirms that you have them going to the wrong pins.

No public wish lists :(