avatar

Member #373803

Member Since: October 28, 2012

Country: United States

  • Luigi never did tell Mario where the koopa’s really come from.

  • “No more ZOOM ZOOM, plane go BOOM BOOM!”

  • I love this little board….. but word of caution, the micro usb pulls off kind of easy, be very gentle. It would be nice if SF could used vias as the usb footprint pads for added strength which is how we do it where i work for heavy use applications.

  • Hold still, this new optical augmentation module will change the way you see… or don’t see.

  • will these run without the capacitor?

  • Has any one successfully uploaded a sketch witlessly over xbee? If so a bit o help would be appreciated, all I get is: “avrdude: error: buffered memory access not supported. Maybe it isn’t a butterfly/AVR109 but a AVR910 device?”
    i can upload over usb but i would like to do it wireless.

  • any suggestions?, Im using an arduino mega as a hydrolic controll system, but it also controls and reads a heater and temp sensor, the temp sensor is the issue as it out puts rs232, i have an rs232 to usb converter. Im hoping that I can use the ftdi basic as the intermediary but the HH42 requires an RTS, so the problem im having is the thermometer doesnt know it is pluged in to the ftdi for lack of this signal. any help would be apreciated

No public wish lists :(