ksaves2

Member Since: April 15, 2008

Country: United States

  • Product GPS-08334 | about 5 years ago

    Just an update. Was able to get the board to work with an ancient laptop with a DB9 port. Have narrowed it down to possibly an errant driver for the USB to serial converter. Seems that Port 2 on the card is for NMEA output.

  • Product GPS-08334 | about 5 years ago

    What’s the secret to getting this evaluation board to work with the Copernicus DIP module? The computer recognizes the USB port, power gets to the board by
    the red LED lighting. I have the 4800 speed set in
    the COM 5 port. I have an antenna plugged into the SMA
    connection. The switches are set correctly I think to
    USB / INT. I don’t have a coin battery for it yet but I don’t think that is needed to get the thing to run. Do
    I have a bad board?
    Kurt

No public wish lists :(