Member #382010

Member Since: November 23, 2012

Country: United States

  • Mine was a bad board/solder. Sparkfun sent a new one and it didn’t have the problem. You might want to contact support.

  • After following the great tutorial below, I have this mostly working. But it seems like the Y axis is not working correctly.

    I’ve run this several times to calibrate the MIN and MAX settings. The problem is that Y always reports -4096 for both MIN and MAX values. min: { -4096, -4096, -507} max: { +424, -4096, +518}

    As a result, the heading doesn’t work correctly. Could this be the module or the library? Has anyone else had this problem?

    Thanks in advance

No public wish lists :(