Member #391677

Member Since: December 20, 2012

Country: United States

  • Product SEN-11028 | about a year ago

    Hi Jeff, I solved! The SCL and SDA pins on Arduino Leonardo is digital 2 and 3 as reported on Wire Library at http://www.arduino.cc/en/Reference/Wire. Now I begin to have fun…

    Bye, Manuel

  • Product SEN-11028 | about a year ago

    Thank you Jeff anyway. I’m searching around but at the moment I didn'f found anything. Bye

  • Product SEN-11028 | about a year ago

    Hi, sorry for my simple question but I read a lot the forum and i didn’t find an answer. I’ve connected my sen1128 to arduino leonardo as you said and i correctly uploaded the example sketch. It seems that nothing works well. I see only the “on led” fixed green and on the serial monitor is just blank. It seems that there is a problem with communication. Is it necessary to define the port for I2C bus? Thank you! Regards, Manuel

No public wish lists :(