×

SparkFun will be closed May 25, 2015 for Memorial Day. Orders placed after 2pm on Friday the 22nd will ship out on Tuesday. Thanks!

Member #39722

Member Since: May 17, 2008

Country: United States

  • If you use this eval board with the Leonardo, using digital pin 7 as the serial receive pin will not work. I recommend using using the solder switches to use the hardware serial. (Or temporarily jumper pin 7 to pin 0 and pin 8 to pin 1)

    See Leonardo note on this page: http://www.arduino.cc/en/Reference/SoftwareSerial

  • Wish list of needed items (and an optional) http://sfe.io/w107598

  • https://www.sparkfun.com/products/13049 For ardunio mounts

  • Doh. I tried Black = 5V, White = GND, Red = Signal and mine went up smoking.

    I had previously used “black wire is GND, the red wire is VDD, and the white wire is DQ” – which worked for me – but I ripped my connections out before realizing I hadn’t written them down. When I looked them up another time, I followed the 2nd set of advice that didn’t coincide with my device.

    Why isn’t this data part of the description? ugg….

Re-Programming the LilyTiny / LilyTwinkle

Member #39722 7 items

Goes with https://learn.sparkfun.com/tutorials/re-programming-th…