Member #397863

Member Since: January 13, 2013

Country: United States

  • I have a similar issue. It looks like my 110P04-05 is fried. If I feed 13.5V to the input pins, it reads 1.8V on the other end. In my case, this happened after my bot got stuck and presumably pulled too many amps. I have a 20A fuse at the battery and also before the motors, so current should have been below 20A. I’m wondering why it blew.

    I’ll try bypassing it and see how that goes…

    Does anyone have a good replacement part number for this component?

No public wish lists :(