×

SparkFun will be closing early at 3:30 Friday 5/27 and remain closed Monday for Memorial Day (5/30). Orders placed after 2pm MT on Friday (5/27) will process and ship out on Tuesday (5/31).

Member #399764

Member Since: January 18, 2013

Country: United States

  • Thanks for the reply! I saw that before and found it to be unclear. I decided to take my chances at the risk of frying the module and fortunately it worked! :) Here’s the pin-out for future reference: From left to right with the module facing front and up: Pin 1: TX, Pin 2: RX, Pin 3: GND, Pin 4: VCC Tip: The TX (Pin 1) pin is the one marked with a tiny arrow pointing to the right.

  • I seem to be having a moment of stupidity here but can anyone tell me where can the pin diagram be found? On the board all I see is a little triangle on the first pin from left to right with the module facing front: sensor up and connector down. Thanks in advance for the help.

  • Did it work for you? If so, can you share the register settings you used?

No public wish lists :(