Member #403228

Member Since: January 28, 2013

Country: United States

  • Thanks for indicating the problem with this circuit. I just bought my kit last week and it was driving me crazy why my circuit didn't work.

  • The Guide is in the back compartment, everything else is in the front compartment.

  • I used this sensor with the sparkfun inventor's kit. I used the example circuit #7. It was giving me inconsistent (temperature jumps of 10 degress F) and low readings. If I touched any of the wires in the system the temperature reading jumped. I replaced the ground to sensor wire with a 330 Ohm resistor, this made the reading consistent and accurate.

No public wish lists :(