Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #405414

Member Since: February 4, 2013

Country: United States

  • You can find interesting explanation on this page http://cholla.mmto.org/computers/arduino/promicro.html, even if it is for the pro-micro, this is the same behavior for FIOV3. I have recently bought one, running under linux also, i use eclipse + avrdude or Arduino IDE as well to program it. I have now a little experience on this board an i can try to help you if you want. For example on Fedora the modem-manager http://forums.fedoraforum.org/showthread.php?t=252054 was disturbing the soft reboot (The "trick" of setting the baud rate to 1200 and then opening and closing a connection ). The better for going on is that you open a topic on the https://forum.sparkfun.com

  • Hi Daniel, i am facing exactly same problem as you, only one way communication possible between FioV3/Xbee S1 and UNO/xbee . Unable to send from FIOv3 , RX led always off and ASO led blinking. i am running under linux and i can get data on Serial port. Do you have solved your problem ?

No public wish lists :(