×

Doing some holiday shopping? Please check here for shipping deadlines to make sure your order arrives in time.

Member #411720

Member Since: February 21, 2013

Country: United States

  • I designed a nifty case for a pi and this hat. The case exposes all of the ports and has a slot for the stylus. If anyone wants the STL files to print a case, let me know.

  • I haven't tried a pi 4, but I discovered that you cannot use Buster. I found a 2019-04-08 full Stretch image and that worked. I am using a pi 3B.

  • Too many letters too fast. A listing in the article of the various modules along with their + / -'s would be great. And, there were some components laying on the table which were not referenced. As the English teacher said, "If you have a gun hanging on the wall of your play's set, it better be fired by the 3rd act."

  • I have the dongle working, but I still get the two messages shown above every 8 to 12 seconds. I looked at the page referenced with the patch and didn't see the link referenced for the rt5370sta.ko module. But, looking at my system, that is the module that is loaded and running. I have some other pcDuinos that came with the ASUS N13 dongles. They work fine and no error messages.

No public wish lists :(