×

With the recent surge in Omicron cases, shipping may be slower than stated times. We are working to build, ship and respond to everything as quickly as possible. Please see all COVID-19 updates here. Thank you for your continued support.

Member #423029

Member Since: March 26, 2013

Country: United States

  • There are two example wiring pictures for the tutorial and they don't match. The first wiring picture showing the teal UNO board has either /CS or SD-to (MISO) not connected, depending on which way the ribbon cable is flipped. Also depending on flipping either /BUSY or /RESET is going to D10 which should be /CS. That picture is totally wrong and should be replaced. I had been trying to verify connections compared to pin definitions in the sketch.

    The second example showing the RedBoard has the correct connections.

No public wish lists :(