Member #42303

Member Since: June 26, 2008

Country: United States

  • Product LCD-09393 | about 3 years ago

    “SFE, could you please post the schematic and source code for v2.5? The versions you have now appear to be the v2 (with the 16f688). Thanks!"
    I 3rd that motion.
    The hex file is not the same as the one that read from 16F88 originally. Please give us the correct soure code.
    Many thanks.

  • Product LCD-09067 | about 3 years ago

    The hex file is not the same as the one burnt in the unit. Please disclose the same working c source for this unit, which is exactly used for the hex burnt inside.
    Please, please.
    Otherwise, don’t buy it. You can not make your changes unless you find what they did distill or hide.

  • Product LCD-00258 | about 3 years ago

    I ordered LCD-09067 which is white on black serial LCD. It worked with orignal package.
    using MPLAB with PICKit 3, I could load the modified version which was from serLCD-v2.7, however, it did not work for some reasons. After that, I reloaded the orginal firmware from SerLCD-v2.zip or SerLCD-v2.7xx.zip. Neither did it work. I doubt the firmware and source code are not the working version.
    Any ideas?

  • Product LCD-09067 | about 3 years ago

    using MPLAB with PICKit 3, I could load the modified version which was from serLCD-v2.7, however, it did not work for some reasons. After that, I reloaded the orginal firmware from SerLCD-v2.zip. Neither did it work. I doubt the firmware and source code are not the working version. Any ideas.

  • Product LCD-09067 | about 3 years ago

    I made some changes to show my particular message on the screen. How can load .hex (It is intel hex format?) into PIC16F88 thru PICKit 3. I do have PICkit 3. Thanks for your information.

  • Product LCD-09067 | about 3 years ago

    Mike, Thanks for your quick response. I got one serial LCD
    LCD-09067 yesterday. Does CC5X support 32bit variables? Can I use MPLAB to compile your source code?
    Aslo, I want to use very small LCD just like SCD55104A from OSRAMP Opto? Do you carry such small LCD or LED (at least 8 chars)?
    Thanks.

  • Product LCD-09067 | about 3 years ago

    what is the compiler or tool chain for serLCD-v2? I’m new to this pic development environment. Please give me the list of steps for setup since I want to modify this firmware for my application.
    thanks.

No public wish lists :(