Member #423034

Member Since: March 26, 2013

Country: United States

  • Product SEN-12705 | about a month ago

    Would be nice if you had LEDs with the proper wave lengths to go with this.. I need a bunch of them from 280-390nm..

  • Product WRL-10823 | about 11 months ago

    Here is another library for this module with the arduino leonardo.. It does everything from switching between HID/SPP to HID reports .. If you’ve used the arduino leonardo USB HID then this library won’t be strange for you.. Here is the link: https://github.com/baselsw/BPLib

  • Product WRL-10938 | about 11 months ago

    For you that have problems with this module, I wrote a arduino library for the communication between this module and a arduino leonardo.. Try it out here: https://github.com/baselsw/BPLib

    //Basel

  • Product WRL-09358 | about a year ago

    Hey, I have a question regarding the level shifting in the schematic.

    If you connect the Bluetooth mate to, let us say, an Arduino, then the TX (Arduino) would be connected through the resistor to the RX(Bluetooth Module). Meaning that the voltage at RX in the bluetooth module will be 5V at some point during transmission!

    Why aren’t there any Mosfet on the RX-line (for proper level shifting)?

No public wish lists :(