Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.
Track My Order
Frequently Asked Questions
International Shipping Info
Mon-Fri, 9am to 12pm and
1pm to 5pm U.S. Mountain Time:
Chat With Us
April 22, 2013
about 3 years ago
Highest I can measure on the board is around 32V
I believe there is a typo in the provided schematic.
U4 should be LT1615 as opposed to 1651 as noted.
If this is correct. the data sheet for the part is: http://cds.linear.com/docs/en/datasheet/16151fas.pdf
Does anyone know the maximum voltage present on this board?
Curious if it also does a large diode cap step- up to 500ish Vdc like the Sen-111345 part.
about 5 years ago
I have the exact same problem with our scope. Attempting to monitor an output signal from an MCU and the same beep, shut off, click, turn on, beep turn off. In fact my scope will even do it without probes connected. Has to be an internal problem. Did you ever get anything resolved?
No public wish lists :(