×

Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.

Stephen D

Member Since: May 4, 2013

Country: United States

Profile

Electromechanical Engineer and Ham Radio operator

  • There are 3 terminals on this switch. Here is how I hooked it up for 12v power application (on-off switch for a battery)

    Ground- 470 ohm resistor to limit LED current. +- Battery Positive. LED-Supply voltage for circuit.

    The LED on the switch only comes on when the switch is in the ON position. If you want it illuminated whenever the battery is connected, swap the connections to + and LED.

  • There are 3 terminals on this switch. Here is how I hooked it up for 12v power application (on-off switch for a battery)

    Ground- 470 ohm resistor to limit LED current. +- Battery Positive. LED-Supply voltage for circuit.

    The LED on the switch only comes on when the switch is in the ON position. If you want it illuminated whenever the battery is connected, swap the connections to + and LED.

No public wish lists :(