Matt Maurer

• Product DEV-09815 | about 2 years ago

  I’d like to second this, please?

• Product DEV-09815 | about 2 years ago

  Unfortunately my initial test shows that 1 3.7v LiPo will not drive this and the Twin Gear box. It’ll move forward but reverse isn’t working :(. I’ve had to series up two LiPo’s to get reverse to work… but now I’m delivering ~6.5 volts to the motors at full speed… I’ll have to control that or lose these motors before their expected life.

  I haven’t however tried to switch the board to the 3.3v selection, might try that before too long.

No public wish lists :(