Member #439405

• 

  Tutorial - Installing a Bootloader on the MicroView about 5 years ago

  I used the Code Bender test on the bad batch... they were bad according to the test (flashing yellow LED on the left but not the center). Just for fun I tested one of the new batch. I got the same result. Bad according to Code Bender. So I tried another one. Again, bad. Is there something wrong with the Code Bender test or did I get a second bad batch?

• 

  Product WIG-12915 about 5 years ago

  If you define all pumps as being the same I guess. But it's like saying all people are the same.

• 

  Tutorial - Using EAGLE: Schematic about 6 years ago

  Sweet! That as quick! Much appreciated. Merry Christmas and have a magnificent 2014

• 

  Tutorial - Using EAGLE: Schematic about 6 years ago

  The Connectors library is hosed up too. I can't add the arduino serial connector or the AVI header... Do you guys test your libraries before you upload them?

  Loading /Applications/EAGLE-6.5.0/lbr/SparkFun-Eagle-Libraries-master/SparkFun-Connectors.lbr ...

  Error:

  line 17404, column 10: redefinition of name '2X3_SMD' in tag <package>

• 

  Tutorial - Using EAGLE: Schematic about 6 years ago

  I'm following the Eagle tutorial and trying to add the power jack to the schematic. I get this error:

  Loading /Applications/EAGLE-6.5.0/SparkFun-Eagle-Libraries-master/SparkFun-Connectors.lbr ...

  Error:

  line 17404, column 10: redefinition of name '2X3_SMD' in tag <package>

  Got any ideas for how to fix this?

No public wish lists :(