Stephen Gewand
Member Since: June 2, 2013
Country: United States
-
![]()
Product COM-09264 | about 11 months ago
Nevermind. It looks like I forgot to set the grid size to 6 instead of 50 on the autorouter.
-
![]()
Product COM-09264 | about 11 months ago
I have changed the restring pad sizes to 0 (for all max, percent and min) and the overlap error goes away, but when I try to use the auto-router, everything but the led routes. The yellow ratsnest is left for those 4 pins. Any idea what I might be doing wrong?
-
![]()
Product COM-09264 | about 11 months ago
Great! Thank you very much!
-
![]()
Product COM-09264 | about 11 months ago
Eagle is complaining of overlap between each solder point, and the autorouter won’t work on the footprint. Is there something I can change within eagle to force it?
No public wish lists :(