Member #446632

Member Since: June 13, 2013

Country: United States

  • Product PRT-00114 | about 11 months ago

    That was it! I took my soldering iron to the middle prong of the voltage regulator which had a bit of solder pretty close to the prong next to it and got it out with my solder sucker. Hooked it up and it read 5 even :) Thanks for taking the time to help, I didn’t know where to start.

  • Product PRT-00114 | about 11 months ago

    So this is embarrassing, I soldered it together (first soldering) but the output is around 8v it fluctuates by about .1v when I switch from 5v to 3.5v. I’m using a 9v 1.5A switching mode wall wart for what it’s worth. Anyone know what could be wrong with it or how I can fix it?

No public wish lists :(