Member #449789

Member Since: June 26, 2013

Country: United States

  • Product CEL-10741 | about 10 months ago

    I’m looking to connect the ADH8066, using the eval board, to an Arduino Pro Micro (5V/16MHz). My initial thought is to connect the Rx and Tx pins on one to the Tx and Rx pins on the other, set the baud rate to 115200 (or is it 9600?), plug in the module with USB and a wall wart if necessary, insert a SIM card, and get going by passing data from the Arduino to the GSM. The data is coming from an EM-406A GPS, and I set it into a string before exporting it. Is this the right plan, or do i need to do things differently?

    Thank you for your help.

No public wish lists :(