Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #451358

Member Since: July 2, 2013

Country: United States

  • I was able to get it running with slow data (e.g. one line of ASCII per second at 9600 baud). At higher data rates (hundreds of bytes per second at 38400) it records nothing, garbage, or intermittently. Ideas?

    I am running straight from an Arduino serial port. I'm as sure as I can be that the bits and parity are correct. I can see correct output with the Arduino serial port monitor on my computer. I am using the RXI0 and TXO0 on the programming port of the Logomatic; I could not find in the data sheet which UART is preferred to log (this or the TX01 RXI1 on the other side).


    sample lines logged (first line is OK), Sometimes it is complete garbage, sometimes like this. 0,0,0,0,0,0,0,0,0,267,0,-90.00,268,19 0,0,0,0,0,0,Oâ& &ó-105.0,0,0,0,0,0,0,0,0ˇ¶S&K8,-90.00,284,19 0,0,0,0,0,0,¸ˇräöbí≤∫j§¯0,0,0,0,0,0,0,0,0,276,0,-90.00,287,33 0,0,0,0,0,0,0Ï˛ &ó-105.00,0.00

No public wish lists :(