×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #454028

Member Since: July 14, 2013

Country: United States

  • I can't seem to get either the Quad Relay (https://www.sparkfun.com/products/16566) or the Single Relay (https://www.sparkfun.com/products/15093) to function using the Example sketches Example_2_Quad_Relay_Basics and Example_1_Single_Relay_Basics. I am using an Artemis Redboard Nano connected to the relay with a Qwiic connector. I power the quad relay with 10V from a lab power supply. Single relay doesn't need external power for the relay coils, as I understand it. Both power LEDs lights up, and the Serial print statements work, but no relay actuation (either audible, or measuring continuity with a multimeter).
    I tested them one at a time, not daisy chained.

No public wish lists :(