Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #4553

Member Since: May 19, 2006

Country: United States

  • I have not been able to find a single MicroSD card that works. I have ordered and returned multiple cards from amazon now. As of right now this is useless.

  • Can someone post MicroSD cards here that work? I tried a 32gb card I already had and I get the -84/-110 error. I purchased a class 4 32gb card because I read somewhere that it can only handle 4mb/s class 4, and I get the same error. I ran a speed test on the new card and even tho its class4 it is read/write 20mb/s.

  • For the people getting the constant high values.. I have 2 power sources on my project, a 5v for arduino and a 3.3v for other things. When I connect the mic to the 5v I get those constant high values. If I connect it to the 3.3v the values for silence drop to the 50's and then peak up to 1024 when I yell at it.

  • Hey guys, if I already have the bob mic https://www.sparkfun.com/products/9964 and mono amp https://www.sparkfun.com/products/11044, do I just bypass all the stuff in the datasheet? Do I just go from the AUD pin on the mic to the Ain pin on the HT8950? And the same for the Audio pin on HT8950 to IN on the amp? Then just hook up regulated power, 2 pots for Frequency and Vibrato, and four switches?

No public wish lists :(