TGruenwald

Member Since: July 25, 2013

Country: United States

  • Product DEV-09802 | about 10 months ago

    (First post)I spent a day trying to get this card to work. First problem, I hadn’t pressed the shield down far enough to connect all of the pins. I figured that out after I had given up on the Sparkfun linked libraries and examples. Arduino has an SD library and example code that just gives you your SD card info. I used that example to get my shield and card working.

    With the Arduino SD library, be sure to make the following two changes: —- const int chipSelect = 8; —- pinMode(10, OUTPUT);

    After that, everything should work fine. Also, I’m using a 16GB microSD HC Kingston card.

No public wish lists :(