×
Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.
hagna
Member Since: August 21, 2008
Country: United States
-
Figure 1.3 "If the direction of travel to the exit or exit discharge is not immediately apparent, signs must be posted along the exit access indicating the direction of travel to the nearest exit." 1910.37(b)(4)
-
Jim at sparkfun tech support says that there should be no splash screen when you power on. Kit Ryan's article is inaccurate that way.
-
Oh and it also works if I hold down the reset button while I run avrdude.
-
on ubuntu hardy avrdude wouldn't program the micro and gave the following message:
avrdude: Yikes! Invalid device signature.
avrdude: Expected signature for ATMEGA168 is 1E 94 06
After I connected pin1 on the micro to the programmers RESET or SS pin avrdued was able to program it and the light blinks.
Why doesn't this tutorial say anything about connecting SS to pin1?
No public wish lists :(