×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

jan.brutovsky

Member Since: August 26, 2008

Country: United States

  • This board allows to interface somehow virtually with this I2C sensor ( Humidity and Temperature Sensor - SHT15 ), if there is no hw port enabled/free for it.
    thanks
    JAn

  • downloading the firmware needs to a little change in the makefile:
    change this line:
    LOGOV2.FW: main.elf
    to this one:
    FW.SFE: main.elf

  • This is a great tool for easy data logging. Easy to use with microSD.
    Please be avare that the firmware has a small mistake, but you can easily correct it by WinARM. when you would like to use all ADC lines the system will not work.
    You need to change in the source:
    AD0CR = 0x00020FF02; // AD0.1
    AD1CR |= 0x01000000; // start conversion
    to
    AD0CR = 0x00020FF02; // AD0.1
    AD0CR |= 0x01000000; // start conversion
    because you are using the ADC0 not ADC1
    Jan

No public wish lists :(