Member #475489

Member Since: October 4, 2013

Country: United States

  • Product DEV-10999 | about 6 months ago

    Suggestion for V12: provide a through-hole somewhere that connects to PD5 (pin 22). It doesn’t have to be added to the row of pins on the edge, just something somewhere that makes it easy to connect a wire to PD5…

    Why? So that I can use the USART as SPI master while using the main SPI as a slave.

    Now I will have to unsolder R6 and solder on a very small wire to the pad for pin 22.

  • Product PRT-10217 | about 6 months ago

    yes, at 500mAh it will take ~4 hours to recharge if empty…

  • Product PRT-10217 | about 6 months ago

    No you may not charge two batteries in series. You would need to provide 8.4 volts for a 2S configuration.

  • Product BOB-10467 | about 7 months ago

    so you can (easily) use it with a breadboard as shown in the last picture…

No public wish lists :(