Member Since: September 14, 2008

Country: United States

  • Thanks for this! Just a couple of notes for any Imp newbies like me.

    In the Arduino code where you are instructed to change !softwareserial.h! by replacing the !’s with < and > make sure you also change softwareserial to SoftwareSerial . If you don’t the sketch won’t find the library.

    And if you try the useful suggestion in the comment by Member #357302 (“You can still run this code if you only have one impee. Just connect the output back in to the same imp as an input on the planner.”) you need to remember to change the serial speed in the serial monitor to 19200 from the default 9600. Otherwise you will get back odd characters and won’t know what you did wrong.

  • Dimensions are on the photos. You can tell the rough size from that.

No public wish lists :(