×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #485492

Member Since: November 5, 2013

Country: United States

  • Other than voltage, there are other issues with compatibility. Mainly I/O pin speed. For instance, the DHT11 sensor cannot be used with a Galileo board, because the I/O speed is too slow. https://communities.intel.com/message/216870#216870

    I am not sure if any of the Ethernet, WiFi, or SD card shields would work. But using the onboard Ethernet and SD card work. Also adding in a mPCIe WiFi card allows you to use the WiFi like you would with a shield. So, really there is no need for those shields on Galileo.

  • Today, Amazon and Newegg are shipping them for $59.

  • The pre-built Linux image only works with two wireless cards Intel N 135 or N 6205.

    Any WiFi card that has a Linux driver should work. I personally have installed an Intel N 6235 and it works great. I followed these instructions. http://www.malinov.com/Home/sergey-s-blog/intelgalileo-addingwifi (though I used different antennas)

  • You can buy it today from several other distributors. https://communities.intel.com/thread/47443

No public wish lists :(