Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.

Member #488157

Member Since: November 13, 2013

Country: United States

  • I am underwhelmed. I found the fan to be rather noisy and anemic. I do not understand how you guys managed to make a hovercraft with these fans. Perhaps careful attention to the skirt/surface tolerances and over-driving the fans would do it. I had hoped to improve combustion in my fireplace by forcing air through a 1" copper pipe above the fire, and then down to exhaust through multiple holes at the bottom edges of the fire. I don't think these fans will do the job. I should not be surprised; 10 watts (800 mA at 12 V) is not much power. I am considering a ducted fan "jet" engine for RC airplanes. Unfortunately, they are quite pricey. These blowers may find a use animating the thin filmy skirts of ghosts and ghoul decorations on Halloween.

No public wish lists :(