MCastany

Member Since: December 5, 2013

Country: Spain

  • To wire up a headphone jack you have two options. As the module’s output is differential, you should use a headphone amp with differential input. This is recommended. The other option is to not use an amp. You have to connect the SPKR_L+ (pin 43) to the + plug of a speaker and the SPKR_R+ (pin 42) to the + plug of the another speaker. Then connect AGND (pin 39) to the - plug of both speakers. If you are using the breakout, connect it directly to GND, as AGND is connected to it. Hope this helps you!

  • Good breakout board!

No public wish lists :(