KellyPhillipps

Member Since: October 12, 2008

Country: United States

  • Product GPS-08725 | about 5 years ago

    It may seem like binary is not working at times, it can be caused by running the unit for a short time then shutting it off.
    I ran the unit for a few seconds then shut it off, there were no files. When I leave it running and plugg in the USB it forces a flush of the buffers (thanks to FR) and the data is whole. It threw me off in testing various configuration parameters and so I dug deeper.
    Kelly

  • Product GPS-08725 | about 5 years ago

    FR, how might I shut off the double click function. Is it a recompile? Thanks,
    Kelly

  • Product GPS-08725 | about 5 years ago

    I am having similar troubles. I’d say start with this, I know it works but haven’t figured out how and why minor changes cause it to not work. So far binary data is not working but everything else is. Don’t use the EXEC_BIN_ONLY FW file. I’ll keep testing and let you know what I find.
    config_menu=0
    log_gps=5
    log_accel=10
    send_gps_to_bt=0
    log_batt=1
    save_txt=1
    save_binary=0
    save_nmea=0
    accel_X=0
    accel_Y=0
    accel_Z=0
    g_FSrange=1

  • Product GPS-08725 | about 5 years ago

    I was just trying to upgrade to Francesco’s firmware. From what I can see the bootloader will look at the SD card which is a very nice feature. Is this correct?
    Thanks

  • Product GPS-08725 | about 5 years ago

    Could someone point me in the right direction on how to upgrade the firmware? thx.

No public wish lists :(