×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Neopax

Member Since: October 31, 2008

Country: United States

  • I have two of these boards and am wondering if you would explain in detail how to re-enable the 9th and 10th A2D channel. I need as many A2D ports as I can get.

  • Jatkins, I'm by no means an authority on this, but I would guess that it uses a 3.3V signal since that is what the MCU operates at.
    I would suggest using a header rail, it will make the board more portable from project to project and you won't have to worry about as much strain protection for the wires. If you want, use a polarized header rail and housing to prevent connecting things backward.

No public wish lists :(