Member #517245

Member Since: February 4, 2014

Country: United States

  • I am trying to program this board using an Arduino Uno R3 as an ISP programmer. I keep getting the message “avrdude: stk500_getsync(): not in sync: resp=0x00”. I have tried a 10uF capacitor between reset and ground after having programmed the Uno as an ISP. I have tried a 100nF cap between reset and 5V. I’ve used COM ports 3 and 4. The only way I can get the error to disappear is by holding down the shift key while programming the target board. Any help will be greatly appreciated.

No public wish lists :(