Forgot your password?
No account? Register one!
June 9, 2006
Product DEV-00633 |
about 4 years ago
Another idea, rather than pull out pins to make it easier to solder, instead the best method I found was to use heatshrink tubing, like this: http://pulse.yahoo.com/_UP7A4YLMEKPMJ2RJQN7TIK2YOA/blog/articles/45555?listPage=index
Once a pin is soldered, heatshrink it, and then it is
safe to solder the adjacent pin with no risk of shorts.
No public wish lists :(