Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #518475

Member Since: February 8, 2014

Country: United States

  • I did try the wpa-ssid without quotes - no success in connecting to wifi.

    Here is the output of 'uname -a':

    root@ubilinux:~# uname -a Linux ubilinux 3.10.17-yocto-standard-r2 #7 SMP PREEMPT Thu Feb 26 09:57:06 UTC 2015 i686 GNU/Linux root@ubilinux:~#

    Here is the output of restarting wlan0:

    root@ubilinux:~# ifup wlan0 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

    Listening on LPF/wlan0/78:4b:87:a5:b0:2a Sending on LPF/wlan0/78:4b:87:a5:b0:2a Sending on Socket/fallback DHCPDISCOVER on wlan0 to port 67 interval 6 DHCPDISCOVER on wlan0 to port 67 interval 13 DHCPDISCOVER on wlan0 to port 67 interval 2 No DHCPOFFERS received. No working leases in persistent database - sleeping. root@ubilinux:~#

  • Yes, definitely running WPA on my network. In your section on enabling WiFi, I reverted back to the quick and dirty way and used the 11 character password, in plain text. I also tried your suggestion to disable IPv6 - all to no avail.

    I've reflashed the image 3 times and spent several hours browsing the internet for a solution.

    As I mentioned in my first comment, wifi on the latest Yocto image works very well, so I believe I have the issue narrowed down to Ubilinux.

  • Unable to connect to WiFi network after loading Ubilinux. As a reference, WiFi was working as expected under the Yocto installation. When I run the ifup wlan0 command I get a message stating "No DHCPOFFERS received."

    Running ifconfig shows wlan0 with no inet addr but it does show an inet 6 address.

    Running iwconfig shows ESSID as "off/any" and Encryption key as "off"

    My interfaces file has the following contents:

    interfaces(5) file used by ifup(8) and ifdown(8)

    auto lo iface lo inet loopback

    auto usb0

    iface usb0 inet static address 192.168.2.XX netmask

    auto wlan0 iface wlan0 inet dhcp # For WPA wpa-ssid "A............Z" wpa-psk c9...........4e10fe05 # For WEP #wireless-essid Emutex #wireless-mode Managed #wireless-key s:password

    And the following 4 lines are for when using hostapd...

    Any help would be greatly appreciated. Thank you.

  • $74.95 seems a bit expensive. I try to support SparkFun whenever I can, and I usually don't mind spending a small premium on products to support their good work, but Frys has the same product for $59.99 and free, same-day shipping.

  • I guess I'm late to the party. I don't see how I can acquire this product. Is the offer no longer valid?

No public wish lists :(