Nexisnet

Member Since: November 10, 2008

Country: United States

  • Product BOK-09516 | about 4 years ago

    It’s always nice to have a hardcopy, but FYI Parallax gives away full digital copies of all their books.
    http://www.parallax.com/Portals/0/Downloads/docs/books/edu/Roboticsv2_2.pdf
    -Adam

  • Product SEN-08161 | about 5 years ago

    VTI has a good and heavily-commented example C program here.
    It uses the SPI hardware on an ATMega16L, and is easily portable to other AVR devices. The reading/writing functions (especially for indirect read/write registers) would be useful for other devices as well.
    Keep in mind that this code was written for the first revision of the SCP1000. With the current revision stocked by SparkFun, you can skip step 6, the low-noise configuration (although it doesn’t hurt to leave it in).
    -Adam

  • Product WIG-08627 | about 5 years ago

    With the stock hardware/firmware, is there anything that will prevent you from draining a single-cell Lipo battery if you just leave the Logomatic on?
    -Adam

No public wish lists :(