×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

mmcshmi11

Member Since: November 11, 2008

Country: United States

  • Product SEN-08739 | about 5 years ago

    The camera is small, so I’m sure the sizings given in the above images are correct.
    I actually have an issue with mine and I’m wondering if anybody else does… I definitely have it hooked up correctly (unless a measured 12v from a power supply doesn’t work…), but cannot get any image to appear on my computer screen using an EasyCAP usb capture device. Has anybody else had an issue with this and found it to be the settings used to capture?
    If I switch the jumper between NTSC and PAL it starts to show random fuzzy images on the screen for a few seconds, then goes away.

  • Product LCD-08335 | about 5 years ago

    http://document.sharpsma.com/files/LQ043T3DX02_SP_122805.pdf
    ^ This link may work a little better

No public wish lists :(