×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #53133

Member Since: November 17, 2008

Country: United States

  • This unit works very well for setting up a GPS clock with NTP.
    Using

    $PSRF103,08,00,01,00*2C
    

    the unit will output ZDA messages about ~100 ms after the PPS signal.

    For my clock project I use PPS line, and set the unit to only output ZDA messages once a second. This setup works very well with NTP.

  • If anybody is curious about using this module as a clock reference, you can get ZDA messages using this command:
    $PSRF103,08,00,01,00*2C\r\n

No public wish lists :(