×

SparkFun will be closed May 25, 2015 for Memorial Day. Orders placed after 2pm on Friday the 22nd will ship out on Tuesday. Thanks!

jcraig111

Member Since: December 3, 2008

Country: United States

  • OK for all of you that are still wondering about the “+ /- ” question. You will get +24 between the - and + out puts. Measuring either one to the common ground will give you nothing. The ground is for the AC in. I got one of these and tested it so this is what I found. Hope that is helpful.

  • Hey guys, I’ve been using the brother to this display, ( the amoled 32028) and needed to put it into a small box, so the P1-ED board (breakout board) was too big. I found these connectors on Digikeys’s site that work. SAM8243-ND for the thru hole, and SAM8244-ND for the SMT. You can make your own breakout board using these sockets.

  • Hey guys, I’ve been using the brother to this display, ( the amoled 32028) and needed to put it into a small box, so the P1-ED board (breakout board) was too big. I found these connectors on Digikeys’s site that work. SAM8243-ND for the thru hole, and SAM8244-ND for the SMT. You can make your own breakout board using these sockets.

  • Did the first graph get past ya noob (this comment for urallnoobs)

  • Well that was time wasted for me….did get to answer one question. Hope our pain serves the Sparky IT guys well. If you are going to brag about how large your server is best just lay it on the table next to a tape measure. Hey just for grins post the quiz so we can take it for self-esteem. Hope you'all had fun!

  • woooo hooooo lets go!

  • I have to say also that being ready an hour before the start and having nothing but time outs and pages that only partly loaded….I would say the servers were not up to the task…..I was bummed about having wasted 21/2 hours of time trying to get to the check out page….waaa waaaa waaaaa for me!

No public wish lists :(