cnp

Member Since: December 5, 2008

Country: United States

Profile

Bio

I created Gamevee.com’s grab feature, if anyone knows what that is. If not, it was a system that automatically converted Halo 3 film saves to video. Unfortunately the site has since been shutdown, but I promise it was cool when it was up.

Universities

North Carolina State University

  • Product DEV-09078 | about 5 years ago

    This is just a copy and paste of two comments I posted for the breakout board version of this connector that I think might be helpful:
    The pin outs are slightly different on my g1. It appears that pin 7 (labeled AG) is supposed to be analog ground (for mic + audio). When pin 8 (labeled CK) is connected to any ground (pin 5, 7, or 12), audio output is enabled. I believe the labels may point to this, with AG being Audio Ground and CK being Check? I’m still trying to figure out the behavior of pin 9. I can only get it to control the music player. Short press (connection to ground) causes audio to play/pause while long press brings the music app to the foreground.
    Pin 4 is used to detect the presence of the wall charger. If you connect that through to the unused port of a mini usb plug, and then plug in the wall adapter, your phone will be able to charge at a faster rate. The usb plug coming out of the wall adapter ties that pin to ground so the phone knows it’s safe to pull more current than the usb spec allows.

  • Product PRT-09167 | about 5 years ago

    Pin 4 is used to detect the presence of the wall charger. If you connect that through to the unused port of a mini usb plug, and then plug in the wall adapter, your phone will be able to charge at a faster rate. The usb plug coming out of the wall adapter ties that pin to ground so the phone knows it’s safe to pull more current than the usb spec allows.

  • Product PRT-09167 | about 5 years ago

    The pin outs are slightly different on my g1. It appears that pin 7 (labeled AG) is supposed to be analog ground (for mic + audio). When pin 8 (labeled CK) is connected to any ground (pin 5, 7, or 12), audio output is enabled. I believe the labels may point to this, with AG being Audio Ground and CK being Check? I’m still trying to figure out the behavior of pin 9. I can only get it to control the music player. Short press (connection to ground) causes audio to play/pause while long press brings the music app to the foreground.

No public wish lists :(